What to film at your exhibition booth so it works after the show

The product demo, staff explaining, visitors, the hall and a short cut for sales: what to shoot at an exhibition booth in Malaysia so the film works for months.

By the Kinetic Studio crew 5 min read

2 presenters walking into a Siong How store, with the Haier and Siong How logos on screen

Shoot what a buyer would want to see if they missed the show: the product working, your staff explaining it, real visitors at the booth, and enough of the hall to prove where it happened. Then cut a short version your sales team can send to every person they met in the week after the show.

This guide is for marketing managers and exhibitors in Malaysia who are paying for a booth and want the footage to keep working once the hall is packed away. It covers the 5 things to shoot, the cuts to plan, and a worked example from the Haier booth at BCCK in Kuching.

What a booth film is for after the doors close

A booth costs months of planning and lasts a few days. The film is the part that stays. In our experience it gets used in 4 places:

  • Sales follow-up. Your team met dozens of people at the booth. A short film in the follow-up message reminds each one what they saw.
  • People who did not come. Dealers, retailers and customers who missed the show see what they missed.
  • Your own pages. The website, LinkedIn, the showroom screen.
  • Next year’s booth. The film plays on the booth screen, and it helps whoever signs off the next booth budget.

A film made only to prove the booth existed does none of these. Each use needs different footage, so plan the shoot around them.

The 5 things to shoot

1. The product demo. Close shots of the product doing its job: a door opening, a hand on a control panel, a screen lighting up. These are the shots that sell, and they are the ones crews forget when the hall gets busy. Film them early, before the doors open, when you can move freely.

2. Your staff explaining. A member of your team showing a visitor how something works, filmed from the side, not posed to camera. If you want their words usable, they wear a clip-on mic. Our guide on clean audio on a trade show floor covers how.

3. Visitors at the booth. Real people looking, asking, pointing. This is the proof that the booth drew a crowd. PDPA applies to personal data, so put a filming notice at the booth and ask before close-ups.

4. The hall. The venue sign, the entrance, the aisles, neighbouring booths in passing. Without it, a booth film could have been shot in your own showroom. With it, viewers know it was a show, and which one.

5. The short cut for the sales team. Plan it on the shot list, not in the edit. It needs a few strong vertical shots and one line from a staff member that sums up the booth. We put it on the event shot list before the show opens.

A worked example: Haier at BCCK, July 2024

We filmed the Haier and Siong How booth at the HOMELove Home & Living Expo at BCCK in Kuching, 18 to 21 July 2024. The film runs 1 minute 29 seconds, horizontal.

It opens on a map zooming into Kuching, then the lit Haier sign with a title card naming the booth, the expo and the dates. Then the hall: other booths, visitors walking the aisles. Then the booth itself. Staff in Haier shirts explain products to visitors, one pointing up at a unit while 2 visitors listen. There are close shots of a fridge interior and a hand on a self-clean panel, the air conditioner wall, and the row of washing machines with short text lines over them. Both logos sit in the top corner of every shot from the hall and the booth. It ends on the Haier end card.

Exhibition hall film, July 2024 Events · Haier The Haier and Siong How booth at BCCK, Kuching, July 2024. Hall, staff with visitors, product close-ups, both logos in the corner.

The booth also had a film before the show. The retailer activation we made with 2 presenters walks into a Siong How store, shows the products, and ends on a card with the expo dates, BCCK and the booth numbers. That cut told people where to go. The hall film showed what they found.

Retailer activation with two presenters Brand films · Haier A retailer activation film with 2 presenters for Haier and Siong How. It ends on the expo dates, BCCK and the booth numbers.
The opening frame of the retailer activation film, shot in the store before the expo.

The cuts to plan from one booth day

CutLengthFormatWhere it goes
Main booth film60 to 90 secondsHorizontalWebsite, LinkedIn, YouTube, next year’s booth screen
Sales cut30 to 45 secondsVerticalWhatsApp and email follow-ups, Reels
Hero product clips15 to 30 seconds eachVerticalProduct pages, dealer and retailer pages
Teaser, before the show30 to 60 secondsVerticalYour pages and partners’ pages, the week before

Those lengths are our working ranges, not platform rules. We explain how one shoot feeds several cuts in one event, three cuts.

If the film will play on a booth screen next year, cut a version for that too. Tradegroup’s guide for exhibitors recommends captions in a bold font that can be read from a distance, so the message works without audio. Nobody hears your booth screen over the hall.

Plan the day around the hall’s quiet hours

The best booth footage comes from a simple split. Before the doors open: product close-ups, the empty booth, the hall sign, staff interviews in quiet. During the busy hours: visitors, staff explaining, the aisles. Near closing: anything you missed, and the vertical shots for the sales cut.

On most jobs that is 1 or 2 crew, sized to the booth and the length of the show. The same person who shoots it edits it, so the shots planned in the morning are the ones that end up in the cut. For the rest of this kind of work, see the exhibitions and conferences hub.

Before you book the booth crew

Write down the 4 places the film will be used. Tell the crew which products are the heroes and when the hall is quiet. Ask for each cut, its length and its delivery date in the quote.

If you have a booth coming up, send us the date and a line on the job. We reply with a quote within 1 working day. We are based in Kuala Lumpur, we have shot in Kuching, Samarahan and Miri, and travel outside KL is quoted with the job.

Questions people ask

What video content should I make at a trade show?

Plan for a main booth film of about 60 to 90 seconds, a short vertical cut your sales team can send to the people they met, and a short clip for each hero product. If you have the time before the show, a teaser that tells people where your booth is gives the event a before as well as an after.

What should a booth film show?

The product working, your staff explaining it, real visitors at the booth, and enough of the hall to show where and when it happened. A film of an empty booth with music over it shows the stand. A film with people and products in use shows the show was worth attending.

Can we film visitors at our booth?

Yes, with care. PDPA applies to personal data, so treat a recognisable face with care. Put a notice at the booth that filming is taking place, ask people before you film them up close, and keep anyone who says no out of the edit. For anything unusual, check with your lawyer.

How long should an exhibition booth film be?

For the main film, about 60 to 90 seconds is enough to show the booth, the products, the staff and the hall. The sales cut should be shorter, around 30 to 45 seconds, because it is watched on a phone by someone deciding whether to reply. Hero product clips work at 15 to 30 seconds.

Can the booth film play on the booth screen at next year's show?

Yes, and it is one of the best uses for it. Cut a version with captions that can be read from across the aisle, because the hall will drown out the sound. Tradegroup's guide for exhibitors recommends bold captions that carry the message without audio.

How much does exhibition videography cost in Kuala Lumpur?

It depends on the number of show days, the crew size, the cuts you need and whether the show is outside the Klang Valley. Ask for a quote that lists each cut, its length, its delivery date and the usage rights. We reply with a quote within 1 working day once we have the date and a line on the job.

Sources

0:00 / 0:00